Yamaha 01x Page 109 Owner'S Manual Download

Page: 109 / 156

01X Owner’s Manual

Remote Function List

109

Before Using

Basics Section

Appendix

Getting Started

Reference

[SHIFT]+[F2]

Starts the Mixer View window./Brings the Mixer View window to the front of the com-
puter screen.

—

[SHIFT]+[F3]

[SHIFT]+[F3] as defined in Cubase/Nuendo.

—

[SHIFT]+[F4]

Closes the current window.

—

*16

[SHIFT]+[F5]

[SHIFT]+[F5] as defined in Cubase/Nuendo.

—

[SHIFT]+[F6]

[SHIFT]+[F6] as defined in Cubase/Nuendo.

—

[SHIFT]+[F7]

[SHIFT]+[F7] as defined in Cubase/Nuendo.

—

[SHIFT]+[F8]

[SHIFT]+[F8] as defined in Cubase/Nuendo.

—

[GROUP]+[F1] – [F8]

Corresponds to 1 – 8 of the Channel View on the Mixer Window.

—

[UNDO]

Executes the Undo operation.

—

[SHIFT]+[UNDO]

Executes the Redo operation

—

[SAVE]

Executes the Save operation.

—

[SHIFT]+[SAVE]

Executes the Revert operation, restoring the status that was saved last.

—

*25

[WRITE]

Enters a Marker at the current song position.

—

[

]

Hold to continuously rewind.

—

[SHIFT]+[

]

Moves the song position to the top of the song.

—

[[

]

Moves the song position to the previous Marker.

—

[

]

Hold to continuously fast-forward.

—

[SHIFT]+[

]

Moves the song position to the end of the song.

—

[[

]

Moves the song position to the next Marker.

—

*15

[

■

]

Press to stop recording or playback. Pressing this when playback is stopped goes to the
song location at which the song playback started at last time.

—

[

]

Press to start playback.

lights

*39

[

●

]

Press this to start song recording. The [

] (Play) and [

●

] (Rec) lamp are turned on dur-

ing recording.

lights

[ZOOM]+Cursor [

]

Zoom

—

FOOT SWITCH 1

USER A as defined in Cubase/NUENDO

—

FOOT SWITCH 2

USER B as defined in Cubase/NUENDO

—

[SCRUB] (NUENDO only)

Turns Scrub on and off. When Scrub is on, the dial can be used for Scrub playback.
When Scrub is off, the dial is used to move the song position.

lights

PAN mode

[PAN] (MULTI CHANNEL only)

Knobs 1 – 8

For editing parameters.

—

FOOT SWITCH 2

USER B as defined in Cubase/NUENDO

—

EQ mode

[EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (SELECTED CHANNEL only)

Knobs 1 – 8

For editing parameters.

—

SEND mode

[SEND] (SELECTED CHANNEL only)

Knobs 1 – 8

For editing parameters.

—

PLUG-IN mode

[SHIFT]+[PLUG-IN] (SELECTED CHANNEL only)

Knob 1 (on page 1 only)

Changes the Slot Number.

—

Knob 2 (on page 1 only)

Turns the Effects on or off.

—

Knobs 3 – 5 (on page 1 only)

Selects an Effect Type.

—

*17, 30

Knobs 1 – 8 (turning)
(on page 2 and later)

Edits each of the parameters

—

SEND EFFECT mode

[EFFECT]/MASTER EFFECT mode EFFECT]

➝

[EFFECT] (Global mode only)

Knob 1 (on page 1 only)

Changes the Slot Number

—

Knob 2 (on page 1 only)

Turns the Effects on or off.

—

*29

Knobs 1 – 8 (on page 2 and later)

Edits each of the parameters

—

*18, 29

INSTRUMENT mode

[SHIFT]+[SEND] (Global mode only)

Knob 1 (on page 1 only)

Changes the Slot Number.

—

Knob 2 (on page 1 only)

Turns the software tone generator on or off.

—

Knobs 1 – 8 (on page 2 and later)

Edits each of the parameters.

—

*18

No function

[AUDIO] [INST] [MIDI] [BUS/AUX] [OTHER]

Button

Function

LED

Notes

(page 114)

Summary of Contents for 01x





























































































































































Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands

Yamaha 01x, Owner'S Manual

Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands