Yamaha 01x Page 62 Owner'S Manual Download

Page: 62 / 156

Mixing Tutorial

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

Routing audio to the digital stereo output

In the section above you learned how to route digital audio

into the 01X.

In this section, we’ll see how to send it back out again.

One common routing would be to send the entire stereo

mix to the digital output for recording. Another would be

to use the digital output as an aux stereo send for external

effects.

■

Operation

Connect the digital source to the DIGITAL STEREO

OUT jack on the rear panel.

If you are using the digital output as an aux send, make

sure your external effect processor has an appropriate

digital input. If you are recording the stereo mix, use

the digital input on your recorder (DAT deck, etc.). As

above, the 01X connectors are S/PDIF; make sure the

device you are connecting has the same.

Call up the Utility mode by pressing the [UTILITY]

button.

Press knob 2 to call up the Patch parameters.

Select page 6 with the DISPLAY [

] (Up/Down)

buttons.

Page 6 contains Output Patch settings for the DIGITAL

STEREO OUT and STEREO/AUX OUT jacks.

Use knob 1 to change the assignment to the DIGITAL

STEREO OUT jack.

If you want to use the digital output as an aux send, set

this to “AUX1/2.”

Using the Aux 1/2 sends for external effects lets you

retain the Aux 3/4 sends for the internal effects. You’ll

also need to make other settings, such as routing the

external effect signal back into the 01X (page 88). For

more details on using external effects, see page 60.

If you want to send the stereo mix to the digital output

for recording, set this to “RECBUS.”

Make sure to save your important Patch setups to the

Output Patch Library so that you can call them up in

the future. (See page 91.)

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[ST-BUS]≥D.OUT

[ST-BUS]≥ST/AUX OUT

Page number (current
page is 6 of 8 total)

DIGITAL STEREO
OUT

STEREO/AUX
OUT

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[AUX1/2]≥D.OUT

[ST-BUS]≥ST/AUX OUT

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[RECBUS]≥D.OUT

[ST-BUS]≥ST/AUX OUT

Summary of Contents for 01x





























































































































































Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands

Yamaha 01x, Owner'S Manual

Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands