manualshive.com logo in svg

Yamaha 01x, Owner'S Manual

The Yamaha 01x Quick Reference Manual is available for free download on manualshive.com. This comprehensive user manual provides detailed instructions and essential information for getting the most out of your Yamaha 01x. Easily access and download the manual to enhance your audio production experience.

Share
Download
background image

12

01X   Owner’s Manual

■

Output

●

Outputting only the DAW’s stereo output to Monitor Out or headphones.

............................................................................. MONITOR (pages 37, 96)

●

Outputting only the stereo output of the 01X to Monitor Out or headphones.

...................................................................... MONITOR (pages 37, 96)

●

Assigning the stereo bus, Rec bus and Aux bus signals to the desired mLAN outputs.

...... OUTPUT PATCH (mLAN OUT CHANNEL) (page 90)

●

Selecting which signals (stereo bus, Rec bus, Aux bus 1/2 or Aux bus 3/4) 

are to be output via the DIGITAL STEREO OUT terminal.

...............................................OUTPUT PATCH (DIGI. ST/AUX OUT PORT) (page 91)

●

Selecting which signals (stereo bus, Rec bus, Aux bus 1/2 or Aux bus 3/4) 

are to be output via the STEREO/AUX OUT terminals.

....................................................OUTPUT PATCH (DIGI. ST/AUX OUT PORT) (page 91)

●

Directly outputting the input channel signals 1-8 and 

9-24 (mLAN) via the output terminals/channels.

............OUTPUT PATCH (mLAN OUT CHANNEL)/(DIGI. ST/AUX OUT PORT) (pages 90, 91)

●

Selecting which signal is to be used for Direct Out: 

pre-EQ, pre-fader, or post-fader.

.............................................................................................OUTPUT PATCH (DIRECT OUT POSITION) (page 91)

■

Digital In/Out

●

Enabling/disabling cascade connection of the DIGITAL IN to the stereo bus.

...................................................... D.IN ST-BUS CASCADE (page 93)

●

Setting the attenuation level when connecting the DIGITAL IN to the stereo bus.

....................................... D.IN ST-BUS CASCADE ATT (page 93)

●

Enabling/disabling conversion of the sampling rate of the signal received at DIGITAL IN.

......................... SRC (Sampling rate converter) (page 93)

●

Enabling/disabling dithering of the digital audio 

(intentionally adding noise to minimize effects of quantization noise).

.............................................................................D.OUT DITHER (page 93)

■

Program Change and MIDI

●

Enabling/disabling remote control (including Program Change) over the Multi-Part Editor.

...................... SHIFT+REMOTE FUNCTION (page 87)

●

Setting the MIDI send/receive channels for Program Change.

............................................................................................ MIDI CHANNEL (page 94)

●

Determining whether Program Change messages are transmitted/received or not.

................................................ PROGRAM CHANGE (page 94)

●

Setting a specific Program Change number 

to be transmitted when a Scene is recalled.

.................................................................................. PROGRAM CHANGE ASSIGN TABLE (page 94)

●

Using incoming Program Change messages to change Scenes.

.................................................. PROGRAM CHANGE ASSIGN TABLE (page 94)

■

Others

●

Distinguishing among different 01X units when using Studio Manager.

................................................................. STUDIO MANAGER ID (page 94)

●

Enabling/disabling SCMS (Serial Copy Management System).

...................................................................... DIGITAL OUT COPYRIGHT (page 95)

●

Using the oscillator signal and changing its waveform.

.............................................................................................................. OSCILLATOR (page 93)

●

Setting the stereo pan position

........................................................................................................................................................................PAN (page 99)

●

Adjusting the send level.

.............................................................................................................................................................................SEND (page 100)

●

Setting the transmission position (pre/post) of the signal sent to AUX.

...................................................................... AUX 1 - 4 PREPOST (page 100)

●

Using effects

..............................................................................................................................................................................................EFFECT (page 102)

●

Inserting an effect in the channel signal path.

........................................................................................................................EFFECT PATCH (page 102)

●

Bypassing the effect.

................................................................................................................................................................................BYPASS (page 102)

●

Determining whether or not the input channel signal is sent to the Rec bus and stereo bus.

....................................... RECBUS/ST-BUS (page 99)

■

Reference materials

●

Remote Functions

................................................................................................................................................................. Remote Function List (page 84)

●

Display indications

..................................................................................................................................... Mode selection and Display indications (page 38)

●

Checking the list of available EQ, Dynamics and Effect programs and their parameters.

................................................... Parameter List (page 115)

●

Checking the signal flow of the 01X.

..................................................................................................................................Block Diagram (End of manual)

●

Understanding the indications in the block diagram.

........................................................................................................................................... (page 28)

●

Using the SQ01 online manual.

.............................................................................................................................................................. (Installation Guide)

●

System requirements for the accessory applications.

......................................................................................................................... (Installation Guide)

●

Checking the compatible DAW software.

............................................................................................................................................... (Installation Guide)

●

Checking words and terminology used with the 01X.

............................................................................................................. 01X Terminology (page 14)

●

Memory structure of the Libraries

........................................................................................................................................................................... (page 36)

●

Checking information on the mLAN MIDI ports.

................................................................................................ mLAN MIDI INFORMATION (page 95)

■

Quick solutions

●

Meaning of the display messages

........................................................................................................................................................................ (page 143)

●

Troubleshooting

........................................................................................................................................................................................................ (page 144)

Summary of Contents for 01x





























































































































































Reviews:

No comments

Related manuals for 01x

Euphonix Max Air Control surface Manual preview
Max Air Control surface
Brand: Euphonix Pages: 82
Gastroback Design Stand Mixer Advanced Pro Operating Instructions Manual preview
Design Stand Mixer Advanced Pro
Brand: Gastroback Pages: 52
Adexi GASTRONOMA 18210001 Manual preview
GASTRONOMA 18210001
Brand: Adexi Pages: 55
Sunbeam DELUXE MIXMASTER 2366 Instruction Manual preview
DELUXE MIXMASTER 2366
Brand: Sunbeam Pages: 56
Optimum RK-0245 Operating Instructions Manual preview
RK-0245
Brand: Optimum Pages: 36
Tascam D00851300A Owner'S Manual preview
D00851300A
Brand: Tascam Pages: 28
American Audio M1624FX User Manual And Reference Manual preview
M1624FX
Brand: American Audio Pages: 26
JBSYSTEMS Light CONTROL 5.2 - V1.0 Operation Manual preview
CONTROL 5.2 - V1.0
Brand: JBSYSTEMS Light Pages: 20
CombiSteel 7455.1410 User Manual preview
7455.1410
Brand: CombiSteel Pages: 10
SoundCraft Series Two User Manual preview
Series Two
Brand: SoundCraft Pages: 56
Eagletone satellite looper User Manual preview
satellite looper
Brand: Eagletone Pages: 5
Russell Hobbs 24672 Manual preview
24672
Brand: Russell Hobbs Pages: 8
Linda Lewis LLKPM10E Instruction Manual preview
LLKPM10E
Brand: Linda Lewis Pages: 13
Linda Lewis 2700 Instruction Manual preview
2700
Brand: Linda Lewis Pages: 38
Gemini PMX-250 Operation Manual preview
PMX-250
Brand: Gemini Pages: 8
Sakura Tissue-Tek AutoTEC Operating Manual preview
Tissue-Tek AutoTEC
Brand: Sakura Pages: 70
Dunlop FUZZFACE FFM2 MINI Manual preview
FUZZFACE FFM2 MINI
Brand: Dunlop Pages: 2
Proxima Nadir PX102 Operation Manual preview
Nadir PX102
Brand: Proxima Pages: 27

Brands by name

Popular brands

Load more brands