![background image](http://html.mh-extra.com/html/yamada/881082/881082_operation-manual_894473031.webp)
26
E08 [Oil removal disabled]
<When this error is supposed to occur>
Circulation mode
When the machine starts controlling the same amount of oil replacement
<Error detecting condition>
When no wasted oil flows for 60 seconds even though the machine starts controlling the same amount of oil
replacement.
<Why should the machine detect this error?>
The machine has to check to see if the wasted oil can be removed.
<Display and sound>
Digital display:
“E08”
Error buzzer:
Sounds.
Start idling the engine.
Check the connection of the coupler.
Signal light, Red:
Flashes.
START LED:
Flashes.
<Causes>
1. 60 seconds has passed without your idling the engine.
2.
Since the filter is clogged with dust or any other thing, no oil flows.
3.
Since the automatic valve and the connection hose for circulating oil are not set correctly, the wasted oil does not flow.
<How to recover this error>
1.
Start idling the engine.
2.
Clean the filter to remove the dust or any other thing.
3.
Set the automatic valve and the connection hose for circulating oil correctly again.
When you press the START key, the machine restarts removing the wasted oil. When the machine confirms removal
of the wasted oil, it resumes the operation that had been performed before this error occurred.
If the machine cannot remove the wasted oil for any other reason, it detects this E08 error again. Contact our Service.
CAUTION
- When you press the START key after removing the cause of the error, the machine can basically restart the
operation from a point where the error occurred.
- If an error occurs while the machine is operating, a margin of error of the replaced oil may be substantial.