12
■
Manual replacement of oil 2 (manual)
1.
Connect the power cable to the AC outlet. (The buzzer sounds for one second.)
2.
Press the POWER key.
3.
Press the MANUAL MODE key once and select “ADD” or press the MANUAL MODE key twice and select
“REMOVE”.
4.
Press the SET key without setting any amount of oil to be replaced (“---“ appears on the digital display).
Perform this operation when the set value is “---.”
5.
Insert the flexible nozzle into the level gauge hole.
6.
Hold down the START button.
7.
Only while you are holding down the START key, oil is supplied to the car (or removed from the car).
8.
When you release the START key, the machine stops supplying or removing the oil.
(When you hold down the START key again, you can supply the machine with oil (or remove oil from the machine).
