Satellite Freshwater LED Flex
Lumens
800
Fits Aquariums
18”-48”
Dimensions:
44” x 0.375” x 0.125”
Voltage
12V olts DC
Watts:
13.2
LEDs
48 6.500K White/24 445nm Blue
Remote control modes & operation
• Press the button marked “Blue” to activate the blue lights. Press again to dim.
• Press the button marked “White” to activate the white lights. Press again to dim.
• Use the Mode button to select one of the 7 dynamic modes.
• Press and hold the Mode button for 3 seconds to turn all lights off.
• Press the Mode button again and it will resume to last Mode set.
Quick installation process
• Connect the female DC plug on the remote to the male DC plug from the transformer/power supply.
• Plug the transformer into a GFCI protected AC outlet.
• Position the wired remote in an accessible location.
1- Dusk
2- Lunar Light Blue
3- Dawn
4- Sunny Skies
5- Cloud Cover
6- Storm Low
7-Storm High
Seven exciting modes to choose from.
Using your new remote
Note: Before installation, please ensure the mounting location of the LED strip is clean of any debris
and/or moisture. Do not place closer than 1” to any fluorescent, compact or metal halide lamp.
• Position LED strip near mounting location. Peel back 3M adhesive backing and install strip into place by pressing firmly onto location.
Silicone clips and screws are provided for additional support.
