ABB Vmax 12 Installation And Service Instructions Manual Download

Page: 1 / 36

—

DISTRIBUTION SOLUTIONS

Vmax

Installation and service instructions
12 ... 17.5 kV - 630 ... 1250 A - 16 ... 31.5 kA

Index
I. Introduction

II. Programme for environmental protection

III. Application of the standards for X-ray

emission

1. Packing and transport

2. Checking on receipt

3. Storage

4. Handling

5. Description

6. Instructions for operation of the circuit

breaker

7. Installation 19
8. Putting into service

9. Maintenance

10. Spare parts and accessories

• Make sure that the installation room (spaces,

divisions and ambient) is suitable for the electrical
apparatus.

• Check that all the installation, putting into service

and maintenance operations are carried out by
qualified personnel with suitable knowledge of the
apparatus.

• Make sure that the standard and legal

prescriptions are complied with during
installation, putting into service and maintenance,
so that installations according to the rules of good
working practice and safety in the work place are
constructed.

• Strictly follow the information given in this

instruction manual.

Responsible behaviour safeguards
your own and others’ safety!

For any requests, please contact the
ABB Assistance Service.

—

For your safety!

• Check that the rated performance of the

apparatus is not exceeded during service.

• Check that the personnel operating the apparatus

have this instruction manual to hand as well as the
necessary information for correct intervention.

• Pay special attention to the danger notes

indicated in the manual by the following symbol:

Summary of Contents for Vmax 12





































Search results

Summary of Contents for Vmax 12

Reviews:

Related manuals for Vmax 12

Brands by name

Popular brands

ABB Vmax 12, Installation And Service Instructions Manual

Search results

Summary of Contents for Vmax 12

Reviews:

Related manuals for Vmax 12

Brands by name

Popular brands