Yale HSA3095, Installation Instruction, Page: 9 / 28

9
¥ When the name is complete, press OK to
confirm and return to the previous or main menu.
Note The name can be erased by clearing the
display by entering backward spaces and pressing
OK
To delete User PIN code
¥ Except User #1 which is activated by factory
default and can t be deleted in any way, User #2,
3, 4, 5 and 6 PIN code can be deleted by
following the steps below:
1 Move the cursor to the item Pin Code then
press OK the following screen will show the
status of each User PIN code:
2 Move the cursor to the desired # (2~6) of
programmed user PIN code to be deleted, then
press OK .
3 Press OK and the screen returns to previous
one with the deleted User PIN code marked with
¥¥¥¥
To edit User PIN code
¥ All 6 User PIN codes can be edited freely by the
following steps:
1 Move the cursor to the item Pin Code then
press OK the screen will show the status of
each User PIN code.
2 Move the cursor to the desired # (2~6) of
programmed user PIN code to be
deactivated/deleted, then press OK .
3 Press key, the next screen will ask you to
enter your new PIN code and repeat it for double
confirmation.
4 Follow the same steps as described in Set you
own pin code to edit
Setting Temporary code
The Temporary code is used to arm/disarm the
system for a temporary user and is valid only once
per Arming and once per Disarming. Afterwards, the
Temporary Code is automatically erased and needs
to be reset for a new Temporary user.
¥ The Temp. Code consists of 4 digits and is not
activated as default by the factory.
To set Temporary code
1 Use the arrow keys to select Temp. Code and
press OK
2 You can key in your preferred 4~digit number and
then press OK
3 You are prompted to re-enter the same code
again and press OK .
4 The display now offers Latch Rpt Off or Latch
Rpt On options.
5 Press
5 6
keys to select your option and
press OK . The screen returns to General
Setting menu, setting the Temporary Code is
completed.
Note There is no User Naming feature for Temp.
Code.
Latch Reporting explained
This facility reports arming and disarming of the
system by individual user, this allows you to check
who and when someone entered or left the house.
This is especially useful to confirm when children
arrive home after school. This information is
displayed on the monitor screen of your Intamac
home manager account. Please see the Intamac
home manager user guide Monitoring Your Alarm
System .
Safe At Home Service
The Safe At Home Service from intamac will send
a message when chosen users enter the house and
disarm the system, please see the accompanying
Intamac literature.
Note Each latch report will incur a minimum call
cost.
Add the door/window contact
1 1 * *
2 2ABCabc # #
3 3DEFdef Delete character
4 4GHIghi and backspace
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0 0<space>/-& . +
1 ) M R S M I T H
2 ) M R S . S M I T H
3 ) * * * * * *
4 ) . . . . . .