27
SmartPhone alarm system (EF-Kit3)
Press and hold the learn button (on the rear of the alarm panel) for at least 3 seconds. Led 1 will now flash
and beep to indicate that you have entered learn mode.
Press the two buttons (one by one) on the USB dongle to trigger learning-in signals. The USB dongle will
transmit keyfob signal (button 1) and PIR signal (button 2) to your alarm system. The siren will beep and
flash when each button is pressed.
When both buttons have been learnt in, press and hold the alarm panel learn button for at least 3 seconds.
The LED should now stop flashing and entered standby mode.
For more information, please refer to your alarm manual section: Adding and using accessories
Pairing with your Yale Smart Lock
Note: Please check with your lock installer that the lock is fitted with the correct module for this
USB dongle.
Press the “i” button on your Smart lock. The lock is now in learn mode. Press and hold the USB dongle DDL
button for at least 5 seconds. The lock will beep to confirm successful learnt-in. Press the “i” button to exit
learn mode.
Operation
Arm: Press the arm button on the DVR or mobile app. The alarm will now enter Full arm mode.
Home Arm: Press the home arm button on the DVR or mobile app. The alarm will now enter Home arm
mode.
Disarm: Press the disarm button on the DVR or mobile app. The alarm will now be disarmed.
Door Unlock: Press the unlock button on the DVR or mobile app. The lock will now open.
Intelligent: Please ignore. This is a reserved function for future software updates.
Camera signal loss: With Signal Loss option (Main menu -> Detection -> Signal Loss) enabled,
disconnection of camera cable will trigger alarm during arm mode.
Summary of Contents for H48000-960H
Page 7: ...7 ...
