manualshive.com logo in svg

Yale GDP100VX, Service Manual

The Yale GDP100VX Service Manual is a comprehensive guide for maintaining and repairing your Yale GDP100VX forklift. Available for free download at our website, this manual provides step-by-step instructions and diagrams to ensure smooth operation and maximize the lifespan of your equipment.

Share
Download
background image

  CAUTION

Disposal of lubricants and fluids must meet local
environmental regulations.

5. 

Open  drain  plug  or  loosen  hose  clamp  and  dis-
connect  bottom  radiator  hose  to  drain  coolant
from radiator and engine.

See  Figure  25  for  lift  trucks  equipped  with  a  GM
4.3L gas or LPG engine and single hydraulic tanks.

See  Figure  26  for  lift  trucks  equipped  with  a  GM
4.3L LPG engine and dual hydraulic tanks.

See Figure 27 for lift trucks equipped with a Cum-
mins QSB 3.3L diesel engine.

See  Figure  28  for  lift  trucks  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5,GLP/

GDP45VX6, GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (H813) equipped with a Ku-
bota 3.8L diesel engine, manufactured before Feb-
ruary, 2012.

See  Figure  29  for  lift  trucks  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5,GLP/

GDP45VX6, GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (H813) equipped with a Ku-
bota 3.8L diesel engine, manufactured after Febru-
ary, 2012.

See  Figure  30  for  lift  truck  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5, 

GLP/

GDP45VX6; GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (J813) equipped with a Ku-
bota 3.8L diesel engine.

See  Figure  31  for  lift  trucks  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5,GLP/

GDP45VX6, GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (H813) equipped with a Ku-
bota 3.6L diesel engine, manufactured before Feb-
ruary, 2012.

See  Figure  32  for  lift  trucks  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5,GLP/

GDP45VX6, GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (H813), manufactured after
February,  2012,  equipped  with  a  Kubota  3.6L  die-
sel engine.

See  Figure  32  for  lift  trucks  models  GLP/
GDP40VX5/VX6; 

GLP/GDP45SVX5, 

GLP/

GDP45VX6; GLP/GDP50-55VX (GP/GLP/GDP080,
090, 100, 110, 120VX) (J813) equipped with a Ku-
bota 3.6L diesel engine.

See Figure 33 for lift trucks equipped with a Cum-
mins 4.5L diesel engine.

0100 YRM 1243

Engine Replacement

31

Summary of Contents for GDP100VX


























































Reviews:

No comments

Related manuals for GDP100VX

Haklift HAVA Original Instructions Manual preview
HAVA
Brand: Haklift Pages: 30
Ravas iJack-40 Owner'S Manual preview
iJack-40
Brand: Ravas Pages: 34
little mule HU Profi 25TA Operating Instructions Manual preview
HU Profi 25TA
Brand: little mule Pages: 12
Jungheinrich DFG 425s Operating Instructions Manual preview
DFG 425s
Brand: Jungheinrich Pages: 229

Brands by name

Popular brands

Load more brands