36
Close programming
`
When programming is complete move to the field
and confirm by
pressing ENTER. The recording data is transferred into the table.
`
Switch the unit to standby mode.
The automatic recording cannot start if the device is switched
on. If you have forgotten to switch off the device a message
appears just before the recording starts showing the remaining
time until the programme recording.
Deleting a programme recording
To remove a programme recording from the list, open the timer menu
again. Move the cursor over the recording that you wish to delete. Press
CLEAR on your remote control to delete the programme entry from the
list.
A new window requests that you confirm the deletion. To do so move the
cursor to the field
and press ENTER. The entry is deleted from the list.
Stopping a programme recording
To stop a recording that has already started press STOP during recording.
You can also switch the device into standby mode to end a recording.
