MS-LxP Series Hybrid Servo Driver
Version2.0
MS-LxP Series Hybrid Servo Driver
Version2.0
8
PA-12
Maintain time
10
0~200
PA-13
Choice of delete the
level signal of
tracing error alarm
1
0/1
PA-15
Choice of MF level
1
0/1
PA-16
alarm signal output
level
0
0/1
PA-17
Single and double
pulse choice
0 Pulse direction
mode
0
0/1
1 double pulse
mode
PA-18
Pulse effective
choice
0
0/1
PA-19
Choice of motor
rotation direction
1
0/1
PA-2
3
Position ratio
Set the proportion
of the position loop
controller gain, the
larger the value, the
bigger the stiffness.
5
0~10
PA-2
4
Feedforward
coefficient of speed
Set the position loop
feedforward gain,
the larger the value,
the bigger the
stiffness.
1000
0~1000
PA-7
1
speed section 1
In different speed
section, the
adjustments on
resonance
suppression help to
eliminate vibration.
942
0~60000
PA-7
2
resonance
suppression
coefficient 1
50
0~200
PA-7
3
speed section 2
5024
0~60000
PA-7
4
resonance
suppression
coefficient 2
50
0~200
PA-7
5
speed section 3
6280
0~60000
PA-7
6
resonance
suppression
coefficient 3
50
0~200
3
）
Parameter management EE-
There are 6 level 2 menus under EE as below:
Level 1 menu
Level 2
menu
Function
EE-
（
parameter
management
）
EE-SEt
Parameter write-in, means write the
parameters of driver’s memory in EEPROM.
If users don’t do this operation, the
parameters you changed will restore.
EE-rd
Parameter read-in, means read the
parameters of EEPROM in memory.
EE-bA
Parameter backup, means write the
parameters of memory in EEPROM.
