Attach SideWinder to the crossbars.
if you have square
bars, loosen the
tabs in the brackets
by bending them
repeatedly.
Remove the tabs with
scissors or pliers.
IF BARS ARE ROUND, CONTINUE BELOW.
Do you have square or
round crossbars?
Attach the four hex keys and tighten.
Attach two brackets per
crossbar, with bracket opening
toward the center of the vehicle.
install the U-bolt over the bar and
into the plate and brackets.
REAR CROSSBAR:
FRONT CROSSBAR:
Position the sideWinder
outboard as far as possible
on the crossbars.
insert two bolts into the
rear plate (near the tray).
•
PAD on the plate must be
installed upward.
•
holEs must be toward the
rear crossbar.
if you have purchased a lock, follow lock
core instructions to install the lock.
Lock quick release lever.
