ATTACH BOOM TUBE TRAY TO THE CARRIER BASE.
Align holes; insert bolt
through metal washer
and tray hole, then plastic
washer as shown.
•
Tighten the nut and bolt
using two wrenches.
•
TighTEn so ThE TRAy
cAn sTill PivoT.
TO CHANGE TO DRIVER'S SIDE LOADING:
•
loosen the knob until
it pops up, and the
fork base can pivot.
•
Release the
lower end cap
by removing the
pivot bolt with two
wrenches.
•
slide the stopper off
the base, turn and
replace the stopper.
•
Reassemble the pivot
ends and tighten.
•
Tighten so that the
base can still pivot.
plastic
washers
metal
washers
THE SIDEWINDER IS ASSEMBLED FOR PASSENGER SIDE INSTALLATION.
You can change the loading side or continue to step 3.
9/16"
3/4"
