1031832F-3/12
Install large HITCH-bolt and lock-washer.
Use a 7/8 or 15/16
inch socket wrench
and TIGHTEN.
Push the silver release
buttons and pivot the arms
down.
Attach the hitch lock.
Lock the carrier to
the vehicle.
Insert the key, lock
the hitch lock.
Cover the lock
opening.
Remove the stop pins from both sides.
Raise each arm and push it in toward
the mast until it stops.
Reset the pins into the upper
holes to secure the arms.
Hook a strap
onto each of the
six cradles.
Pull cable through frames and
back over top of first bike.
Connect the lock to the lock
post. Lock it with key.
To load bike set ONE tire
at a time into cradles.
Pull hard to close straps.
Position rubber pads to
protect bike finish.
