![background image](http://html1.mh-extra.com/html/yakima/mightyjoe-2/mightyjoe-2_manual_3375985007.webp)
1033308B - 7/24
Use extra strap to
secure the wheel.
The weight of the bikes
may cause the straps to
slack or dislodge hooks.
TIGHTEN UPPER AND SIDE STRAPS
AGAIN AFTER BIKES ARE LOADED.
Secure the front
wheel on the bike
closest to the car.
On the inner hubs,
pull and turn the
red triggers.
REPLACE RED TRIGGERS.
• Make sure that both triggers
are seated in the hub!
• Move the arms, they should
snap into place.
Rotate load
arms to just
above
horizontal.
EXTEND LOAD ARMS.
LOAD HEAVIEST BIKE FIRST
Secure straps tightly over bike
frame and seat tube.
The straps can be routed
under the cables.
Alternate bike
directions to avoid
interference.
Arrange bike frame in the cradles for greatest stability.
Always load first bike
with chain away from
vehicle.
Attach one rubber strap to each
cradle and stabilizer.
To slide cradles along the carrier arms,
close cradle and stabilizer. Close
cradles while loading bikes.
\
stabilizer
BEFORE
DRIVING AWAY
WITH YOUR
BIKES:
READ ALL
WARNINGS ON THE
PAGE AFTER NEXT.
LOAD REMAINING
BIKES.
UNLISTED VEHICLES:
LOAD ARMS
CAUTIONS:
• Adjust load arms to just above horizontal.
• Make sure bikes have sufficient
clearance from the ground.