background image

1033309E-2/24

IF YOUR CAR IS NOT LISTED in the Joe Fit Sheet   

 

or the Fit List, call 888-925-4621 in the USA and Canada,    
or see your dealer.

UNLISTED VEHICLES:

IF YOUR CAR CANNOT BE FOUND (on the Joe Fit Sheet or 
the Fit List, or through the dealer or Yakima) it is “unlisted”. 
Install the carrier as directed in these instructions where 
this icon appears.

When you see this icon, find 
your vehicle in the Joe Fit 
Sheet for frame measurement, 
strap positions, and critical 
notes about your fit.

 DANGER

DO NOT INSTALL THIS 
CARRIER ON A VEHICLE 
LISTED AS “NO FIT”.

FITTING YOUR CAR…

OR

CAUTION: Although your carrier is covered by a warranty (see 
final page), Yakima cannot warranty any installation onto any 
vehicle that is not listed in the Yakima Fit List or Joe Fit Sheet.

LOWER SUPPORT FRAME 

UPPER 

FRAME

To move the frames, pull and turn both 
red triggers on the outer hubs.

LOAD ARMS

 \ 

RED 

TRIGGER

ROTATE THE UPPER FRAME.

Rotate the trigger 
until it remains 
pulled out.

FIND YOUR MEASUREMENT 

IN THE FIT SHEET.

See FITTING YOUR CAR (above).

POSITION THE FRAMES.

t:PVXJMMOFFEB

measuring tape.

t0OBnBUTVSGBDFNPWF

the frames apart.

t8*5)5)&1"%4'-"5

MEASURE FROM THE 
INSIDE EDGES OF THE 
TUBES.

UNLISTED VEHICLES: 

POSITION THE FRAMES. 

0OBnBUTVSGBDFNPWFUIFGSBNFTBQBSU

Follow these guidelines to position your frames on your car.

UPPER FRAME

t8JUIUSJHHFSTPVUBEKVTU

upper frame until it rests on 
the vehicle.

t5IFQPTJUJPOJTSFMBUJWFUP

the lower frame and will 
depend on vehicle shape. 

LOWER FRAME

t"DPNNPOMPDBUJPOJTBXFMMTVQQPSUFEMJDFOTF

QMBUFEFQSFTTJPOKVTUBCPWFPSCFMPXUIFOVNCFST

t1SFTTUIFBSFBmSNMZXJUIZPVSIBOE*GEFGPSNBUJPO

occurs, choose another location.

CAUTIONS:

t%POPUQMBDFUIFMPXFSGSBNFPOHMBTTQMBTUJDPSUIJONFUBM
t4PNF467TWBOTBOEXBHPOTIBWFBMBSHFTFDUJPOPGQPPSMZ

supported metal that will dent under weight.

CAUTION: Some vehicles have a spoiler. If 

any part of the carrier contacts the spoiler, 

do not use this product. 

Summary of Contents for LittleJoe









Reviews: