1033309E-5/24
IF NOT ATTACHING UPPER HOOKS TO GLASS OR PLASTIC, CONTINUE HERE.
Position the frame as determined in
step 6. The upper straps should hold
the carrier in place.
ADJUST UPPER STRAPS.
Adjust upper straps by pulling on the ends. (Loosen by
pressing the metal buckles.)
PLACE LOWER STRAP HOOKS.
Place where directed by the
Fit Sheet Notes.
CAUTIONS:
t,FFQTUSBQTBXBZGSPNIPUWFIJDMFFYIBVTU
t,FFQTUSBQTGSPNSVCCJOHPOTIBSQNFUBMFEHFT
t%POPUBUUBDIMPXFSIPPLTUPQMBTUJDCVNQFST
UNLISTED VEHICLES:
LOWER HOOKS
t5IFmSTUDIPJDFJTUIFCPUUPNPGUIF
trunk/hatch.
t5IFTFDPOEDIPJDFJTVOEFSUIF
bumper if there is a rigid, metal
attachment point.
t5IFUIJSEDIPJDFJTUJFEPXOIPPLT
underneath the vehicle or holes in
UIFWFIJDMFTGSBNF
WARNING: DO NOT ATTACH THE LOWER
HOOKS TO GLASS OR PLASTIC!
If lower hooks must attach to glass or plastic, follow
Glass Hatch Hooks installation on next page.
Position hooks
at side mounting
points directed
by the Fit Sheet
Notes.
CENTER THE CARRIER ON THE CAR,
position the side strap hooks.
UNLISTED VEHICLES:
SIDE HOOKS
t.PVOUUPUIFTJEFPGUIFUSVOLIBUDI
t1PTJUJPOUIFIPPLTTPUIFZXJMMOPU
slide up or down when tightened.
TIGHTEN SIDE STRAPS.
Pull the straps
tighter with two
hands.
TIGHTEN
UPPER
STRAPS.
Bundle the extra
strap ends into the
band.
Pull the straps
tighter with
two hands.
Note: If it is difficult to get the hook in, insert it at a
wider section and then slide it into place.
CONTINUE TO STEP 29
