![background image](http://html2.mh-extra.com/html/yakima/landshark/landshark_manual_3112863003.webp)
1032387D-3/12
LOAD CRAFT AND ADJUST POSITION
•
Place craft in Saddles.
•
Loosen hardware to adjust
position of saddles.
(Saddles can slide
on crossbars.)
•
Loop strap around front
crossbar as shown.
•
Strap must be inboard of
tower.
•
Repeat for rear crossbar.
•
TIGHTEN STRAPS.
•
Position your boat to
allow maximum contact
with saddle surfaces.
•
Saddles will deform for
a close fit with hull after
straps are tightened.
(Saddles can be rotated on the
attachements to fit the hull.)
CENTER CRAFT
ON SADDLES
USE STRAPS TO SECURE CRAFT
FIT BOAT TO
SADDLES
Tighten all hardware
after adjusting
position of saddles.
Do not loop
straps through
saddles! Attach to
crossbars only.
(Straps not included)
Secure front and rear of boat to vehicle at bow and
stern before driving away.
(Tie-downs not included)
Failure to secure front and
rear of long loads to ends
of vehicle can result in
property damage, personal
injury, or death.
STRAPS AND BOW/STERN TIE-DOWNS
can be purchased at your Yakima Dealer, online,
or at (888)925-4621, Monday through Friday, 7:00 AM to 5:00 PM, PST.
SET OF 2
HEAVY DUTY
STRAPS
#05006
SET OF 2
BOW/STERN
TIE-DOWN
#04031