1033017D-3/12
load the Jack.
Second bracket must always contact
the jack near the end of its handle.
Measure the length
of your jack’s handle.
SECOND BRACKET, FORWARD HOLE…
• Finish with flat washer
and nut.
•
TIGHTEN.
SECOND BRACKET, SECOND HOLE…
Insert bolt, with washer,
through backing plate.
(Lock HoLE)
Secure jack handle to
jack with strap.
SECURE THE JACK TO THE BRACKETS.
• Insert short bolt,
with lock washer,
and flat washer.
• Secure at both
brackets.
•
TIGHTEN.
tighten all
nuts & bolts
before loading
the jack.
• Insert bolt, with lock
washer, and washer.
• Add washer.
• Attach coupling nut
(with attached plate).
(BAckING PLAtE)
warning
ALWAYS INSTALL THE JACK ON THE
VEHICLE’S PASSENGER SIDE.
The jack’s foot plate must be at the back
of the vehicle, with the handle below.
foot PLAtE
Position the second bracket at about
2” (5cm) shorter than measured distance.
Use care when lifting
a heavy jack!
If jack’s holes will not align to
coupling nut, loosen the bracket and
adjust until bolt installs easily.