1033017D-11/12
cargue el gato.
la segunda escuadra debe siempre hacer contacto
con el gato cerca del extremo de su palanca.
Mida el largo de la
palanca del gato.
SEGUNDA ESCUADRA, AGUJERO
DELANTERO...
• Termine con arandela
plana y tuerca.
• AJuSTe.
SEGUNDA ESCUADRA, SEGUNDO AGUJERO...
Inserte el tornillo, con
arandela, por la placa
de apoyo.
(AGUjERo PARA
cANDADo)
Asegure la palanca del
gato a éste con la correa.
ASEGURE EL GATO A LAS ESCUADRAS.
• Inserte el tornillo
corto, la arandela
de cierre y la
arandela plana.
• Asegure ambas
escuadras.
• AJuSTe
aJuste todas
las tuercas y
tornillos
antes de cargar
el gato.
• Inserte el tornillo con la
arandela de cierre y arandela.
• Agregue una arandela.
• Agregue la tuerca de acople
(con la placa correspondiente).
(PLAcA DE APoYo)
advertencia
SIEMPRE INSTALE EL GATO DEL LADO
DEL PASAJERO.
la placa de pie del gato debe dirigirse hacia
aTRÁS del vehículo, con la palanca DebaJo.
PLAcA DE
PIE
Coloque la segunda escuadra a unas 2”
(5 cm) menos de la distancia medida.
¡levante los gatos
pesados con cautela!
Si los agujeros del gato no se
corresponden con la tuerca de acople,
afloje la escuadra y ajuste hasta que
el tornillo se instale fácilmente.