1033615B-4/24
Fully tighten
the rear knob.
Fully tighten the front knob.
Close locking
slider.
TIGHTEN DOWN KNOBS, close locking slider.
Remove wheeltray and rear clamp.
Flip orientation of rear clamp 180˚.
Install endcap.
Continued from previous page...
NOTE: You can flip the wheeltray or rear clamp
independently as needed. For instance if you
needed the buckle on the opposite side you
could flip the wheeltray as shown.
Slide wheeltray and rear
clamp back onto forks.
Install vinyl
cap.
