background image

1033041B-3/9

Note:  Shovel or axe must not exceed 8 pounds.

Shovel must clear crossbar and

curve away from you.

READ THESE WARNINGS!

Be sure all hardware is secured

according to instructions. Failure to

perform safety checks before driving

away can result in property damage,

personal injury, or death.

ATTACHMENT HARDWARE CAN LOOSEN OVER
TIME. CHECK AND TIGHTEN IF NECESSARY,
BEFORE EACH USE.

IF YOU NEED FURTHER

TECHNICAL ASSISTANCE OR

REPLACEMENT PARTS:

Please contact your dealer

or call us at

(888) 925-4621

Monday through Friday,

7:00am to 5:00pm

Pacific time.

KEEP THESE INSTRUCTIONS!

Insert long screw from
back and secure with
black knob.

If there is not enough tension to hold the handle securely
with knob fully tightened, reinsert the front plate into the
back slot.

WHEN NOT IN USE, TIGHTEN KNOB COMPLETELY.

Do not use for anything
but shovels and single
bladed axes.

Place shovel or axe into brackets.

Axe head mounts to the

rear, blade up.

NOT RECOMMENDED
FOR CARRYING
THROUGH AUTOMATIC
CAR WASHES

This product is covered

by YAKIMA’s

“Love It Till You Leave It”

Limited Lifetime Warranty

 To obtain a copy of this

warranty, go online to

www.yakima.com

or email us at

[email protected]

or call (888) 925-4621

Summary of Contents for 8007078










Reviews: