MANUAL ( One by One Cut )
AUTO ( Feed & Cut Automatically )
1) Set the AUTO/MANUAL SW.for "MANUAL".
2) Press the Start Switch once.
1) Set the AUTO/MANUAL SW. for "AUTO".
2) When you take the tape out, machine will feed another piece of tape
automatically.
1) Turn off the ON/OFF SW.
2) Remove the front panel and take the blade off.
ALARM (Over Load)
If the tape winds around the roller, and can not cut the tape, the motor stop
immediately and alarm lump is on.
Extreme care for handling blade when you take
out the blade.
3) Take the wound up tape off by tweezers or pliers.
Can turn the roller by hand when the power is off.
When you remove the front panel, the ZCUT-6 will stop automatically for
your safety.
SAFETY SWITCH
HOW TO TAKE OFF THE TAPE
1) Open the Safety Lid.
2) Take off the tape from the body.
3) Pull out the tape upward.
5
FUNCTION
Summary of Contents for ZCUT-6
Page 1: ...YAESU KEIKOGYO CO LTD...
