2
0
0
②
ALARM
LENGTH
AUTO
MANUAL
START
POWER
ON
OFF
（
Set cutting length for 200mm
）
③
①
adhesive side
surface
Tape Feed Roller
Slicon Sponge Roller
⑥
Thank you for purchasing our Automatic Tape Dispenser ZCUT-6.
The ZCUT-6 can cut many types of tape.
Before using, please read this instructionmanual carefully to understand
our machine.
1) The ON/OFF SW. must be "OFF".
2) Set the Length Counter for 200mm.
3) The AUTO/MANUAL SW. is turned to the "Manual"positon.
4) Put the Tape on the Bobbin and attach the tape to the Tape Holder.
5) Pick a stay-on tab up and open the Safety Lid.
6) Pull the tape and fold the end about 20-30mm to the adhesive side.
7) Insert the tape between Tape Feed Roller and Silicon Sponge Roller.
8) Close the Safety Lid.
This is an industrial tape dispenser.
It is not for home use.
Do not use around children.
3
INTRODUCTION
BEFORE USE
⑦
⑤
④
Summary of Contents for ZCUT-6
Page 1: ...YAESU KEIKOGYO CO LTD...
