![background image](http://html1.mh-extra.com/html/yaesu/zcut-3150/zcut-3150_instruction-manual_3093749004.webp)
MANUAL
AUTOMATIC
ALARM
SAFETY SWITCH
4
1) Set Manual/mode to cut a tape one by one.
2) Switch on by pressing the Start button.
3) In the case of cutting any longer than 120mm, it is effective to lift a tape up while taking a tape.
Then next piece of tape will come out like automatically.
1) Set Auto/mode to cut a tape in the specified time interval.
2) Switch on by pressing the Start button and the piece of tape will automatically come out in the
specified time interval.
3) If turning the interval Adjustment Knob 4, interval time in between cutting will be adjustable within
10 second.
1) If turning off the switch, alarm will be cancelled.
2) Please refer to "Before use" (P4) and set the tape properly again after removing it.
(You can turn Roller 12 by hand when turning off the switch.)
3) Please use the machine after confirming that alarm switch is not flashing.
When opening Front Panel, switch will be automatically off and not operate while opening.
When alarm is still flashing after removing the tape jammed,
please turn off the switch immediately and unplug for your
own safety
Please DO NOT open Front Panel more than 90 degree
because cable and wire are connected with Front Panel
and may be damaged if you do it
HOW TO REMOVE THE TAPE
Please open Safety Lid 7 and remove the tape with bobbin from the machine.
Summary of Contents for zcut-3150
Page 1: ...YAESU KEIKOGYO CO LTD...