Attention for
cutting edge
Tightening
Loosening
Screw to fix Blade Cutter
3mm hexagonal wrench
MAINTENANCE
1) Please make sure that switch is turned off and Power Cord is unplugged.
2) Use neutral detergent and clean up rollers and other spare parts.
Do not use thinners, benzine, and any kind of alcoholic oil.
3) Normally, it is not necessary to put any oil to Solenoid and any other main parts.
However, please put some oil on the parts of blade cutter as depends on the condition.
4) Do not put any oil to Solenoid.
HOW TO REPLACE THE BLADE
1) Please make sure that switch is off and Power Cord is unplugged.
2) Remove the hook and open the Front Panel.
3) Loosen the screw for Blade cutter and remove it.
4) Close the Front Panel and fix it firmly.
Please pay your attention when replacing the Blade Cutter
Do not put any
oil to Solenoid
a little drop of oil
a little drop of oil
Blade Cutter
5
Summary of Contents for zcut-3150
Page 1: ...YAESU KEIKOGYO CO LTD...
