Yaesu VXA-200 Operating Manual Download

Page: 47 / 48

This device complies with Part 15 of the FCC rules.
Operation is subject to the condition that this device
does not cause harmful interference.

CCESSORIES

& O

PTIONS

Supplied Accessories

Ni-Cd Battery Pack (7.2V, 700mAh)

FNB-64

Overnight Desktop Charger

NC-77B/C/U

Helical Antenna

ATV-7

Headset Cable

CT-60

Operating Manual
Warranty Card

“

” suffix is for use with 117 VAC,

“

” suffix is for use with 220-240 VAC, or

“

” suffix is for use with 230 VAC.

Available Options

MH-44

A4B

Speaker Microphone

FNB-V57

Ni-Cd Battery Pack
(7.2V, 1100mAh)

FBA-25

Alkaline Battery Case

VAC-800

Desktop Rapid Charger

E-DC-5B

External Power Cable

CN-3

Antenna Adapter

Availability of accessories may vary. Some accessories are supplied as standard per local requirements, while
others may be unavailable in some regions. Consult your Yaesu Dealer for details regarding these and any
newly-available options.

Connection of any non-Yaesu-approved accessory, should it cause damage, may void the Limited Warranty on
this apparatus.

Summary of Contents for VXA-200

















































Search results

Summary of Contents for VXA-200

Reviews:

Related manuals for VXA-200

Brands by name

Popular brands

Yaesu VXA-200, Operating Manual

Search results

Summary of Contents for VXA-200

Reviews:

Related manuals for VXA-200

Brands by name

Popular brands