VXA-200 A
VIATOR
P
ILOT
II O
PERATING
M
ANUAL
38
F
IELD
P
ROGRAMMING
M
ODE
The
VXA-200
’s Book Memories also allow the user
to store, label, and recall channel frequencies which
you may want to use frequently while the
VXA-200
is in the Field Programming mode.
Memory Storage into the Book Memory
r
Press and hold the
PTT
and
LAMP
switches
while turning the radio on, to activate the Field
Programming Mode.
r
Select the desired frequency to be stored in the
Book Memory.
r
Press and hold the [
MW
(
SPL.W
)
] key for 2 sec-
onds. The display will indicate “
BOOK;
” and a
channel number will blink on the LCD.
r
W i t h i n f i v e s e c o n d s o f p r e s s i n g t h e
[
MW
(
SPL.W
)
] key, rotate the
CHANNEL
se-
lector knob to select the desired memory chan-
nel number for storage.
r
Now press and hold in the [
MW
(
SPL.W
)
] key
for 2 seconds; you will now see “
;"""""""
”
on the LCD. To attach an alpha/numeric name
(label) to the memory, proceed to the next step;
otherwise press and hold the [
MW
(
SPL.W
)
] key
for 2 seconds to save the entry and exit.
r
To label a memory with an alpha/numeric name,
the next step is to use the
CHANNEL
selector
knob to select any of the 48 available characters
(including letters, numbers, and special symbols).
When the desired first character appears, press
down on the
CHANNEL
selector knob momen-
tarily to move on to the next character.
r
Select succeeding characters in the same man-
ner, pressing down on the
CHANNEL
selector
knob momentarily after each selection.
r
After entering the entire name (eight characters
maximum), press the [
MW
(
SPL.W
)
] key for 2
seconds to save all data for the channel.
r
Turn the radio off, then turn the radio back on
again to begin normal operation.
Summary of Contents for VXA-200
Page 1: ...Operating Manual ...