Yaesu VX-8GE, Operating Manual

Page: 94 / 168

VX-8GE O
PERATING
M
ANUAL
92
character of the message you wish to store.
Example 1
: Rotate the DIAL knob to select any of the 61
available characters.
Example 2
: Press the
7
key repeatedly to toggle among
the nine available characters associated with that key:
p q r s
P Q R S 7 p
.....
8. Press the
M
key to move on to the next character, if
needed.
9. Repeat steps 7 and 8 above to complete the personal ID (up
to 8 characters). If you make a mistake, press the
B
key
to move back to the incorrect character, and then enter the correct character.
10. Press and hold in the
h
key for two seconds to delete all data after the cursor that
may have been previously stored.
11. When the personal ID entry is complete, press the
m
key
briefly to save the new setting.
12. If you wish to store another personal ID, repeat steps 3
through 10 above.
13. Press the PTT switch to exit to normal operation.
S
ET YOUR
P
ERSONAL
ID
You may choose your personal ID from the member list as follows.
1. Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
53: MES-
SAGE REGISTER .
3. Press the
m
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the
DIAL
knob to select the member box ( 1 ~ 20 )
where your ID is stored.
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
M
ESSAGE
F
EATURE
P
ROGRAMMING A
M
EMBER
L
IST