Yaesu VX-8GE Operating Manual Download

Page: 129 / 168

VX-8GE O

PERATING

ANUAL

127

ODE

50: MEMORY SKIP
51: MEMORY WRITE
52: MESSAGE LIST
53: MESSAGE REGISTER
54: MESSAGE SELECT
55: MIC GAIN
56: MONI/T-CALL
57: MUTE

58: OFF TIMER
59: ON TIMER
60: OPENING MESSAGE
61: PAGER ANS-BACK
62: PAGER CODE-RX
63: PAGER CODE-TX
64: PASSWORD
65: PR FREQUENCY
66: PRI REVERT
67: PRI TIME

68: PTT DELAY
69: RPT ARS
70: RPT SHIFT
71: RPT SHIFT FREQ
72: RX MODE
73: SAVE RX

74: SAVE TX
75: SCAN LAMP
76: SCAN RE-START

77: SCAN RESUME

78: SENSOR DISPLAY

79: SENSOR INFO
80: SET MODE CSR
81: SET MODE FORMAT
82: SMART SEARCH
83: S-METER SYMBOL
84: SPEC-ANALYZER
85: SQL LEVEL
86: SQL S-METER
87: SQL SPLIT
88: SQL TYPE

89: STEP FREQUENCY

90: TIME SET
91: TONE FREQUENCY
92: TONE-SRCH MUTE
93: TONE-SRCH SPEED
94: TOT

95: VFO MODE
96: VFO SKIP
97: VIBRATOR
98: VIBRATOR MODE
99: VOLUME MODE

100: WX ALERT

Selects the Memory Scan channel-selection mode.
Determines the method of selecting channels for Memory Storage.
Programming a Member List for the Message feature.
Selects your Personal ID for the Message feature.
Programming a Message for the Message feature.
Adjusts the microphone gain level.
Selects the

T.CALL

key (just below the

PTT

switch) function.

Adjusts the receiver audio output level when the MUTE function was activated.

Set the OFF Timer time.
Set the ON Timer time.
Selects the Opening Message that appears when the radio is powered on.
Enables/Disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.
Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Programming and activating the Password feature.
Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS Decoder.
Enables/Disables the Priority Revert feature.
Selects the time between the Priority (Dual Watch) channel checks, when the feature is
active.
Selects the time delay before the carrier is transmitted, when the

PTT

switch is pressed.

Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
Sets the receiving mode.
Selects the Receive-mode Battery Saver interval (“sleep” ratio).

Enables/Disables the Transmitter Battery Saver.
Enables/Disables the Scan Lamp (while scanner is paused).
Selects the Scan Re-start Delay time.

Selects the Scan Resume mode.

Selects the sensor information when the transceiver is operating in the “Mono” band mode
with large characters.
Indicates the Information of the internal sensors.
Selects the Set Mode Cursor.
Selects the display format of the Set Mode operation.
Selects the Smart Search Sweep mode.
Selects the S- & TX PO meter Symbol.
Selects the Spectrum Analyzer sweep mode.
Sets the Squelch threshold level.
Adjusts the Squelch threshold level to the S-meter level.
Enables/disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.

Setting of the DIAL frequency steps.

Sets the Clock time.
Setting of the CTCSS Tone Frequency.
Enables/Disables the receiver audio output while the Tone Search Scanner is activated.
Selects the Tone Search Scanner speed.
Setting of the TOT time.

Selects or disables the VFO band edge limiting for the current band.
Setting My Band.
Enables/Disables the Vibrator function.
Selects the vibration mode of the Vibrator function.
Select the [

VOL

] key function.

Enables/Disables the Weather Alert Feature.

OFF

/ SKIP / ONLY

/ LOWER

--
--
--

LEVEL 1 ~ LEVEL 9 (

LEVEL 5

)

MONI /

T-CALL