Yaesu VX-7R Operating Manual Download

Page: 77 / 104

VX-7R O

PERATING

ANUAL

OWER

-O

ISPLAY

ODE

When the

VX-7R

is turned off, the LCD may be set up to display one or more environmen-

tal measurements. These include temperature, barometric pressure, altitude, or combina-
tions of these.

Press the

key, then press the

key to enter the Set mode.

Rotate the

DIAL

to select the Menu Item labeled (

Display Setup #4: DISPLAY MODE

Press the

key to select the new setting. The

options include

NONE

No display when the transceiver is off.

TEMP

Display of the current time plus tempera-
ture when the transceiver is off.

BARO

Display of the current time plus barometric pressure when the trans-
ceiver is off (requires optional

SU-1

ALTI

Display of the current time plus the current altitude when the trans-
ceiver is off (requires optional

SU-1

TEMP+BARO

: Display of the current time, Temperature, and barometric pressure (re-

quires optional

SU-1

TEMP+ALTI

Display of the current time, Temperature, and altitude (requires op-
tional

SU-1

ALL

Display of the current time, temperature, barometric pressure, and al-
titude (requires optional

SU-1

Note

: the current time will always be displayed when the transceiver is off, except

when “

NONE

” is selected.

When you have made your selection, press the

PTT

key to save the new setting and

exit to normal operation.

If any of the above settings (except “

NONE

”) is enabled, the current drain

with the

VX-7R

turned off will be about 20 mA. We recommend that the

Power-Off Display Mode be set to “

NONE

” if you plan to be away from the

radio for an extended period of time.

ISPLAY

USTOMIZATION

Summary of Contents for VX-7R









































































































Search results

Summary of Contents for VX-7R

Reviews:

Related manuals for VX-7R

Brands by name

Popular brands

Yaesu VX-7R, Operating Manual

Search results

Summary of Contents for VX-7R

Reviews:

Related manuals for VX-7R

Brands by name

Popular brands