VX-7R O
PERATING
M
ANUAL
49
Memory Offset Tuning
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
1.
With the
VX-7R
in the “MR” (Memory Recall) mode, select the desired memory chan-
nel.
2.
Now press and hold in the
key for 1/2 second. The “
MR
” indicator will be re-
placed by one which says “
MT
” (“Memory Tuning”).
3.
Rotate the
DIAL
, as desired, to tune to a new frequency.
The synthesizer steps selected for VFO operation on the
current band will be the steps used during Memory Tun-
ing.
4.
If you wish to return to the original memory frequency, press and hold in the
key
for 1/2 second. The “
MT
” indicator will be replaced by “
MR
.”
5.
If you wish to store a new frequency set during Memory Tuning, just press and hold in
the
key for 1/2 second, per normal memory storage procedure. The microproces-
sor will automatically set itself to the next-available clear memory location, and you
then press
again to lock in the new frequency..
If you want to replace the original memory contents with those of the new
frequency, be sure to rotate the
DIAL
to the original memory channel num-
ber!
Any required CTCSS/DCS changes, or repeater offset modifications, must be done before
storing the data into the new (or original) memory channel location.
M
EMORY
M
ODE
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
