VX-7R O
PERATING
M
ANUAL
70
Selecting the Wave-Form Display
1.
Press the
key, then press the
key to enter the Set Mode.
2.
Rotate the
DIAL
to select the Menu Item labeled (
Mea-
surements #2: WAVE MONITOR
).
3.
Press the
or
key to select the desired wave form
(
RX SIGNAL
,
TX MODULATION
, or
All
).
4.
Press the
PTT
key momentarily to save the new setting and exit to normal operation.
Selecting the Units of Temperature Display
1.
Press the
key, then press the
key to enter the Set Mode.
2.
Rotate the
DIAL
to select the Menu Item labeled (
Mea-
surements #3: TEMP UNIT
).
3.
Press the
or
key to select the preferred unit (
°C
or
°F
).
4.
Press the
PTT
key momentarily to save the new setting and exit to normal operation.
Selecting the Unit of Atmospheric Pressure Meter (Barometer)
1.
Press the
key, then press the
key to enter the Set Mode.
2.
Rotate the
DIAL
to select the Menu Item labeled (
Mea-
surements #4: BARO UNIT
).
3.
Press the
or
key to select the preferred unit (
hpa
/
mbar
/
mmHg
/
inch
).
4.
Press the
PTT
key momentarily to save the new setting and exit to normal operation.
Correcting the Atmospheric Pressure Meter (Barometer Offset)
1.
Press the
key, then press the
key to enter the Set Mode.
2.
Rotate the
DIAL
to select the Menu Item labeled (
Measurements #5: BARO OFF-
SET
).
3.
Press the
key to enable setting of this Menu Item.
4.
Press the
key to indicate the barometer data in “hpa”
units.
5.
Press the
or
key to adjust the
VX-7R
display to the
calibrated
barometer
value in the “hpa” units.
6.
Press the
key to save the new setting.
7.
Press the
PTT
key momentarily to exit to normal operation.
S
ENSOR
M
ODE
S
ENSOR
M
ODE
O
PTIONS
