VX-3R/E O
PERATING
M
ANUAL
85
Despite the lack of a DTMF keypad, you can still transmit DTMF tones with the
VX-3R/
E
for repeater control or autopatch use.
M
ANUAL
DTMF T
ONE
G
ENERATION
1.
Press and hold the [
TXPO
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 26:
DT A
/
M
.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3.
Press the [
TXPO
] key to enable adjustment of this Set Mode
Item.
4.
Rotate the
DIAL
knob to select “
MANUAL
.”
5.
Press the
PTT
switch to return to normal display.
6.
Hold the
PTT
switch in to continue transmitting during the following steps.
A. Press the [
TXPO
] key momentarily.
B. Rotate the
DIAL
knob to select the number to be sent, and
then press the [
TXPO
] key momentarily to send the number.
C. Repeat step B as many times as needed until you have com-
pleted the number string.
D. Release the
PTT
switch.
The DTMF “
” code is displayed as “E,” and the DTMF code “#” is dis-
played as “F” on the display.
DTMF A
UTODIALER
10 DTMF Autodial memories are provided, allowing you to store telephone numbers for
autopatch use. You can also store short autopatch or Internet-link access code streams to
avoid having to send them manually.
Here is the DTMF Autodial storage procedure:
1.
Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 28:
DT SEL
.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3.
Press the [
TXPO
] key to enable adjustment of this Set Mode
Item.
4.
Rotate the
DIAL
knob to select the DTMF Memory register
(“
CH0
” - “
CH9
”) into which you wish to store this DTMF string.
5.
Press the [
V/M
] key to begin DTMF Memory entry into the se-
lected register. The first digit location will blink.
6.
Press and hold the [
HM/RV
] key for 2 seconds to
clear
any pre-
DTMF O
PERATION
