VX-3R/E O
PERATING
M
ANUAL
49
6.
To change to another Memory Bank, press the [
F/W
] key, then
press the [
BAND
] key. Now rotate the
DIAL
knob to select the
new Memory Bank, then press the [
BAND
] key again.
7.
To exit from Memory Bank operation, just press the [
BAND
]
key. The “
” icon will disappear from the display, that you
are now in the “regular” Memory Recall mode, without utiliza-
tion of the Memory Banks. The memories stored in the various
Banks will remain in those banks. You do not need to store them again.
R
EMOVING
M
EMORIES
FROM
A
M
EMORY
B
ANK
1.
Recall the memory channel to be removed from a Memory Bank.
2.
Press and hold the [
F/W
] key for one second, then press the [ ] key to remove the
memory channel data from the Memory bank.
C
HANGING
A
M
EMORY
B
ANK
’
S
N
AME
You may change the default Memory Bank Names, which are shown on the display while
selecting the Memory Bank your desire.
1.
Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2.
Rotate the
DIAL
knob to select the Set Mode Item labeled 11:
BNK.NAM
.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3.
Press the [
TXPO
] key momentarily to enable adjustment of this Set Mode Item.
4.
Rotate the
DIAL
knob to select the memory bank on which you
wish to change a label.
5.
Press the [
TXPO
] key momentarily to enable changing of the
name tag.
6.
Rotate the
DIAL
knob to select the first digit of the desired label.
7.
Press the [
V/M
] key to move to the next character.
8.
Repeat steps 6 and 7 to program the remaining letters, numbers,
or symbols of the desired label. A total of six characters may be
used in the creation of a label.
9.
If you make a mistake, press the [
BAND
] key to backspace the
cursor, then re-enter the correct letter, number, or symbol.
10. When you have completed the changes of the label, press the
PTT
switch to save the
label and exit.
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
M
EMORY
B
ANK
O
PERATION
