VX-3R/E O
PERATING
M
ANUAL
113
5.
Repeat the previous step as necessary to complete the message (up to 16 characters).
6.
If you make a mistake, press the [
BAND
] key to backspace the cursor; now re-enter
the correct letter/number.
7.
Press the [
HM/RV
] key to delete all data after the cursor that may have been previ-
ously stored erroneously.
8.
When you have entered the message, press the [
TXPO
] key momentarily to confirm
the message, then press the
PTT
switch to save the settings and exit to normal opera-
tion.
Set Mode Item 33
[
EXT.MNU
]
Function
: Enables/Disables the extended Set Mode Menu.
Available Values
: ON/OFF
Default
: OFF
Set Mode Item 34
[
FW KEY
]
Function
: Set the duration that a secondary function of the [
F/W
] key (press and holding
the [
F/W
] key) is held determines the function they activate.
Available Values
: FW0.3S/FW0.5S/FW0.7S/ FW1.0S/FW1.5S
Default
: FW0.5S
Set Mode Item 35
[
HLF.DEV
]
Function
: Reducing the Deviation level by 50 %.
Available Values
: ON/OFF
Default
: OFF
Note
: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 36
[
HM/RV
]
Function
: Selects the function of the [
HM/RV
] key.
Available Values
: HOME/REV
Default
: REV
HOME: Pressing the [
HM/RV
] key instantly recalls a favorite “Home” channel.
REV:
Pressing the [
HM/RV
] key reverses transmit and receive frequencies during re-
peater operation.
Set Mode Item 37
[
HM>VFO
]
Function
: Enables/Disables the function of the VFO
DIAL
knob, while in the Home Chan-
nel mode.
Available Values
: DISABL/ENABLE
Default
: ENABLE
S
ET
(
M
ENU
)
M
ODE
