manualshive.com logo in svg

Yaesu VX-3E, Operating Manual, Page: 131 / 132

Share
Download
Yaesu VX-3E Operating Manual Download Page 131

Disposal of your Electronic and Electric Equipment

Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Electronic and Electric Equipment should be recycled at a facility capable of handling
these items and their waste byproducts.
In EU countries, please contact your local equipment supplier representative or service
center for information about the waste collection system in your country.

This transceiver works on frequencies which are not
generally permitted.

As for the actual usage, the user has to possess an ama-
teur radio licence.

Usage is allowed only in the frequency bands which
are allocated for amateur radios.

Attention in case of use

Declaration of Conformity

We, YAESU UK LTD. declare under our sole responsibility that the following equipment com-
plies with the essential requirements of the Directive 1999/5/EC and Directive 2011/65/EU.

Type of Equipment:

FM Transceiver

Brand Name:

YAESU

Model Number:

VX-3E

Manufacturer:

YAESU MUSEN CO., LTD.

Address of Manufacturer:

Tennozu Parkside Building, 2-5-8 Higashi-Shinagawa,
Shinagawa-ku,Tokyo 140-0002 Japan

Applicable Standards:
This equipment is tested and conforms to the essential requirements of directive, as in-
cluded in following standards.

Radio Standard:

EN 301 783-2 V1.2.1

EMC Standard:

EN 301 489-1 V1.9.2
EN 301 489-15 V1.2.1

Safety Standard:

EN 60065:2002 +A1:2006 +A11:2008+A2:2010 +A12:2011

RoHS2 Standard:

EN 50581:2012

The technical documentation as required by the Conformity Assessment procedures is
kept at the following address:

Company:

Yaesu UK Ltd.

Address:

Unit 12, Sun Valley Business Park, Winnall Close, Winchester
Hampshire, SO23 0LB, U.K.

List of national codes

 AT

BE

BG

CY

CZ

DE

DK

ES

EE

FI

FR

GB

GR

HR

HU

IE

IT

LT

LU

LV

MT

NL

PL

PT

RO

SK

SI

SE

CH

IS

LI

NO

–

–

–

–

Summary of Contents for VX-3E





































































































































Reviews:

No comments