VX-120 O
PERATING
M
ANUAL
59
To Activate the Password feature:
1.
Press the [
F
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 30:
PSWD
.
3.
Press the [
F
] key momentarily to enable adjustment of this Item.
4.
Rotate the
DIAL
knob to set this Set Mode Item to “
PWD. ON
.”
5.
When you have made your selection, press the
PTT
switch to
save the new setting and exit to normal operation.
6.
If you wish to disable the Password feature, just repeat the above
procedure, rotating the
DIAL
knob to select “
PWD.OFF
” in step
4 above.
If you forget the password number, you may turn on the transceiver by per-
forming the “All Reset” procedure (see page 65). However, the VX-120 will
clear the password, as well as all memories, and will restore all other settings
to factory defaults.
C
HANGING
THE
C
HANNEL
S
TEPS
The
VX-120
’s synthesizer provides the option of utilizing channel steps of 5/10/12.5/15/
20/25/50/100 kHz per step, as well as an automatic step selection based on the current
operating frequency (“AUTO”), any number of which may be important to your operating
requirements. The
VX-120
is set up at the factory in the “AUTO” configuration, which
probably is satisfactory for most operation. However, if you need to change the channel
step increments, the procedure to do so is very easy.
1.
Press the [
F
] key, then press the [
LOW
(
LOCK
)
SET
] key to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 45:
STEP
.
3.
Press the [
F
] key momentarily to enable adjustment of this Item.
4.
Rotate the
DIAL
knob to select the new channel step size.
5.
When you have made your selection, press the
PTT
switch to
save the new setting and return to normal operation.
M
ISCELLANEOUS
S
ETTINGS
P
ASSWORD
Summary of Contents for VX-120 Series
Page 56: ...VX 120 OPERATING MANUAL 54 NOTE...
Page 69: ...VX 120 OPERATING MANUAL 67 NOTE...
Page 85: ...VX 120 OPERATING MANUAL 83 NOTE...
