VX-120 O
PERATING
M
ANUAL
80
Set Mode Item 50
[
VFO.SPL
]
Function
: Enables or disables “VFO Split” operation.
Available Values
: VSP.OFF/VSP. ON
Default
: VSP.OFF
Set Mode Item 51
[
WID.NAR
]
Function
: Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Available Values
: WIDE/NARROW
Default
: WIDE
Note: If “Narrow” is selected, the receiver audio level is increased slightly to compensate
for the reduced deviation. The receiver IF filter bandwidth is not changed via this setting.
Set Mode Item 52
[
WX ALT
]
Function
: Enables/Disables the Weather Alert Scan feature.
Available Values
: ALT.OFF/ALT. ON
Default
: ALT. OFF
The following Set Mode Items will appears when the optional FTD-7 DTMF Paging Unit
is installed.
Set Mode Item 53
[
ANI
]
Function
: Enables/Disables the ANI function.
Available Values
: ANI.OFF/ANI. ON
Default
: ANI. OFF
Set Mode Item 54
[
ANI.WRT
]
Function
: Program the ANI Identifier.
See page 57 for details.
Set Mode Item 55
[
PAGER
]
Function
: Enables/Disables the ANI function.
Available Values
: PAG.OFF/PAG. ON
Default
: PAG. OFF
Set Mode Item 56
[
PAG.COD
]
Function
: Setting the Pager Code for the DTMF Pager.
See page 55 for details.
Set Mode Item 57
[
PAG.ABK
]
Function
: Enables/Disables the Answer Back function of the DTMF Pager.
Available Values
: ABK.OFF/ABK. ON
Default
: ABK. OFF
S
ET
(
M
ENU
)
M
ODE
Summary of Contents for VX-120 Series
Page 56: ...VX 120 OPERATING MANUAL 54 NOTE...
Page 69: ...VX 120 OPERATING MANUAL 67 NOTE...
Page 85: ...VX 120 OPERATING MANUAL 83 NOTE...
