8
VR-120D O
PERATING
M
ANUAL
Installation of Accessories
B
ATTERY
I
NSTALLATION
r
Referring to
Figure 1
, unlock the plate by pushing the latch in the "Open" direction.
r
Remove the Battery Cover from the receiver.
r
Referring to
Figure 2
, insert 2 fresh AA batteries into the Battery Holder. When
installing batteries, insert the (-) end first, then press in the (+) end so the battery snaps
into place. Always replace two batteries at the same time.
r
Referring to
Figure 3
, replace the Battery Cover, then re-lock the bottom plate by
carefully pressing the hinged latch cover back into its normal operating position.
Figure 1
Figure 2
Figure 3
Note:
If you do not use the
VR-120D
for a long time, remove the batteries from the radio,
as battery leakage could cause damage to the
VR-120D
.
L
OW
B
ATTERY
I
NDICATION
When the battery voltage becomes too low, the "Battery"
icon will appear in the display; indicating the batteries
should be replaced. As battery voltage drops further, the
VR-120D
will shut off.
"Battery" icon
FNB-79 B
ATTERY
P
ACK
(O
PTION
) C
HARGING
Please see the Instruction Sheet accompanying the
FNB-79
for installation information.
r
If the
FNB-79
battery pack never been used,
or its charge is depleted, it may be charged by
connecting the
PA-30
AC Adapter and
NC-
82
Charger stand (requires
CA-34
Charger
sleeve), as shown in the illustration, to the
EXT
DC
jack.
r
Allow a minimum of 15 hours (with NC-82,
otherwise; 20 hours) for the
FNB-79
to reach
full charge.
−
+
+
−
AC ine
PA-30
(Option)
E-DC-15
(Option)
NC-82
(Option)
CA-34
(Option)
