29
VR-120D O
PERATING
M
ANUAL
Dual Watch
7.
Dual Watch will halt when the
VR-120D
receives a signal strong enough to break
through the Squelch threshold. The radio will then hold on that frequency according to
the setting of the "RESUME" mode, described previously.
8.
To stop Dual Watch manually, just rotate the
DIAL
knob one click. If you like, you can
then tune manually back and forth between the two Dual Watch memories by rotating
the
DIAL
knob.
9.
Press the [
V/M
] key to cancel Dual Watch operation and return to the previous operat-
ing mode (VFO or Memory).
You can change any or all of the Dual Watch pre-programmed frequency pairs in accor-
dance with your operating preferences.
To program a Dual Watch Memory frequency pair:
1.
Press the [
SCAN
] key, while pressing the [
FUNC
] key, to activate the "Set" (Menu)
mode.
2.
Rotate the
DIAL
knob to select Menu #18 [DW/PW].
3.
Press and hold in the [
FUNC
] key; while holding it in, rotate
the
DIAL
knob to select "DW" as the Priority Monitoring
mode.
4.
Press the [
SCAN
] key while pressing the [
FUNC
] key to
save the new setting and exit to normal operation.
5.
Select one of the frequencies you wish to utilize for Dual Watch, using the main
DIAL
.
6.
Press and hold in the [
V/M
] key for 2 seconds while pressing the [
FUNC
] key. "DWA
W" (Dual Watch Channel "A") will appear on the display.
7.
Now select the second frequency you wish to utilize for Dual Watch.
8.
Press and hold in the [
V/M
] key for 2 seconds while pressing the [
FUNC
] key. "DWB
W" (Dual Watch Channel "B") will appear on the display.
9.
Press and hold in the [
V/M
] key for 2 seconds to activate
Dual Watch between the above frequency pair.
10. Press and hold in the [
V/M
] key for 2 seconds while pressing
the [
FUNC
] key.
11. Now, store this frequency pair into one of the eight available Dual Watch Memory
registers. Just press and hold in the [
FUNC
] key; while holding it in, rotate the
DIAL
knob to the Dual Watch Memory register into which you want to store this frequency
pair.
12. Press and hold in the [
V/M
] key for 2 seconds while pressing the [
FUNC
] key.
