24
VR-120D O
PERATING
M
ANUAL
Memory Mode
Memory Bank Scanning
This feature allows you to scan one or more Memory Banks during Memory Channel
Scanning, while ignoring other banks. For example, you may wish to load broadcast sta-
tions into certain Memory Banks for convenient recall, but ignore them during scanning
(as they are always active, the scanner will halt on every such station).
To set up scanning of certain Memory Banks:
1.
If you are in the Memory mode, change to the VFO mode by pressing the [
V/M
] key.
2.
Press the [
SCAN
] key while pressing the [
FUNC
] key to activate the "Set" (Menu)
mode.
3.
Rotate the
DIAL
knob to select Menu #14 [SCAN].
4.
Press and hold in the [
FUNC
] key; while holding it in, rotate the
DIAL
knob to select
"BANK" as the Memory Bank mode.
5.
Now rotate the
DIAL
knob to select Menu #15 [B LINK].
6.
Rotate the
DIAL
knob while pressing the [
FUNC
] key to
select the Memory Bank which you wish to include while
scanning. Now release the [
FUNC
] key.
7.
Rotate the
DIAL
knob a few clicks; you will observe an
(".") icon toggling on and off below the Memory Bank
number. The "." indicates that the Memory Bank is now in
the Preferential Bank Scanning List.
Now again press and hold in the
[
FUNC
]
key, and rotate the
DIAL
knob to select other
Memory Banks to be included in (or excluded from) the Preferential Bank Scanning List.
Release the
[
FUNC
]
key, and rotate the
DIAL
knob to apply or remove the
"."
from the
selected Memory Bank. Press the
[
SCAN
]
key while pressing the
[
FUNC
]
key when all
Bank selections have been made.
8.
Again press the [
SCAN
] key while pressing the [
FUNC
] key to exit the Menu mode
and return to normal operation.
Press the [
SCAN
] key while pressing the [
FUNC
] key to exit the Menu mode and
return to normal operation.
9.
Press the [
V/M
] key to enter the Memory mode.
10. Press the [
SCAN
] key to initiate Memory Bank Scanning. Only the channels in the
Memory Bank which have an "." below the Memory Bank number will be scanned.
11. To return to normal Memory Channel Scanning, first press the [
V/M
] key to return to the
VFO mode, then re-enter the "Set" (Menu) mode by pressing the [
SCAN
] key while
holding in the [
FUNC
] key. Rotate the
DIAL
knob to select Menu #14, and set Menu #14
to "ALL" by pressing the [
FUNC
] key and rotating the
DIAL
knob one click .
12. Press the [
SCAN
] key while pressing the [
FUNC
] key to exit the Menu mode.
Memory Bank Number
