page 6
MARK-V FT-1000MP Operating Manual
A
CCESSORIES
& O
PTIONS
A
VAILABLE
O
PTIONS
TCXO-6
H
IGH
-S
TABILITY
M
ASTER
R
EFERENCE
O
SCILLATOR
For special applications and environments where
extra frequency stability is essential, such as for long-
term HF packet monitoring under wide temperature
variations, the TCXO-6 provides ±0.25-ppm stability
the master reference oscillator (after 1 min. @ 25 ° C).
MD-100
A8X D
ESK
-T
OP
M
ICROPHONE
Designed especially to match the electrical and cos-
metic features of the MARK-V FT-1000MP, the MD-
100
A8X
has a 600 Ohm impedance, and includes an
up/down scanning ring and a large PTT switch with
latch.
SP-8
L
OUDSPEAKER
WITH
A
UDIO
F
ILTERS
&
LL-7
P
HONE
P
ATCH
O
PTION
Selectable audio high- and low-pass filters together
with a large loudspeaker complement the superb au-
dio characteristics of the MARK-V FT-1000MP with
your choice of 12 different audio filtering combinations.
Two input terminals are provided for multiple transceiv-
ers, with a front panel switch to select between them.
A (monaural) phone jack is provided on the front panel
to take advantage of the audio filters with headphones.
With the optional LL-7 Phone Patch Unit installed
in the SP-8, the MARK-V FT-1000MP can be patched
to the public telephone network. The LL-7 includes a
hybrid transformer circuit to assure proper impedance
matches, and front panel gain controls and level meter
to set proper audio levels on the telephone line.
YH-77STA
L
IGHTWEIGHT
S
TEREO
H
EADPHONES
Dual samarium-cobalt transducers with sensitivity
of 103dB/mW (±2dB, @1 kHz, 35 Ohms) provide the
perfect match for the MARK-V FT-1000MP. During dual
receive with the YH-77STA, one receiver can be moni-
tored in each ear, allowing easy separation of the sig-
nals from the two receivers (or the audio can be mixed,
if desired).
DVS-2
D
IGITAL
V
OICE
R
ECORDER
Serving as either a continuous receiver recorder for
instant pushbutton playback, or microphone audio re-
corder for multiple on-air playback, the DVS-2 applies
the advantages of random-access solid-state digital
memory to serious communications. All data is stored
electronically, with no moving parts except your finger
and the pushbutton. More information is on page 81.
FH-1
R
EMOTE
C
ONTROL
K
EYPAD
The FH-1 is a remote-control accessory designed
to enhance the operating flexibility of your MARK-V
FT-1000MP. The FH-1 permits several remote control
features, which may be selected via Menu program-
ming. More information is on page 76.
IF Crystal Filter Options
Five optional crystal filters may be installed in the
Main Receiver of the MARK-V FT-1000MP, and one in
the Sub Receiver.
Optional Main Receiver Filters
8.2 MHz (2nd IF)
YF-114SN: 2.0-kHz BW (for all modes except FM)
YF-114CN: 250-Hz BW (for all except AM & FM)
455 kHz (3rd IF)
YF-110SN: 2.0-kHz BW (for all modes except FM)
YF-115C Collins Mechanical Filter: 500-Hz BW (for CW
& RTTY)
YF-110CN: 250-Hz BW (for CW only)
Optional Sub Receiver Filter
455 kHz (2nd IF)
YF-115C: Collins Mechanical Filter 500-Hz BW (for CW
& RTTY)
Availability of accessories may vary: some accessories are supplied as standard per local regulations and require-
ments, others may be unavailable in some regions. Check with your Yaesu dealer for additions to the above list.
