Yaesu FTM-6000E Advance Manual Download Page 32

Page: 32 / 37

15 PAGER

Specify the receive & transmit personal Enhanced CTCSS Paging code.

Set the pager receive/transmit code to recognize paging stations or transmit calls to

other stations.

01 -

- 50

01 -

- 50

Set the Receive or transmit pager code.

For more details, see “EPCS (Enhanced Paging & Code Squelch) Function”. (

page 7)

16 PKT.SPD

DATA communication baud rate settings.

Set the communication baud rate for data communication (when using the “DATA”

terminal on the rear).

1200BP

Set the communication baud rate to 1200bps.

9600BP

Set the communication baud rate to 9600bps.

17 RX MOD

Set the band receiving mode.

Each band receive mode may be set.

AUTO

The receive mode (FM mode or AM mode) is automatically se-

lected according to the frequency band in use.

The selected frequency band is set to FM mode.

The selected frequency band is set to AM mode.

18 BND.SEL

Set up band-skipping

Set the selectable bands (frequency band).

In the factory default setting, all bands are set to “ON”.
AIR: 108MHz - 137MHz

VHF: 137MHz - 174MHz

UHF: 400MHz - 480MHz

OTH: 174MHz - 400MHz, 480MHz - 999.995MHz

The frequency bands set to ON, can be selected.

OFF

The frequency bands set to OFF, cannot be selected.

19 RPT.REV

In the factory default setting, [

19 RPT.REV

] is registered in the “Function List” that is

displayed when the [

menu

] key is pressed.

Reverses the transmit and receive frequencies

The “reverse” state temporarily reverses the transmit and receive frequencies. This

allows checking to find if direct communication with the other station is possible.

Summary of Contents for FTM-6000E






































Search results

Summary of Contents for FTM-6000E

Reviews:

Related manuals for FTM-6000E

Brands by name

Popular brands

Yaesu FTM-6000E, Advance Manual

Search results

Summary of Contents for FTM-6000E

Reviews:

Related manuals for FTM-6000E

Brands by name

Popular brands