12
Functions to Use as Needed
Split Memory
Two different frequencies, one for receive and another for transmit, may be registered to
a memory channel.
1. Register the receive frequency to a memory chan-
nel first, as described below:
Enter the VFO receive frequency → Press and hold
the [
V/M
mw
] key → Rotate the
DIAL
knob to select
the desired channel number → Press and hold the
[
V/M
mw
] key
2. Press the [
V/M
mw
] key.
3. Enter the desired transmit frequency to the VFO.
4. Press and hold the [
V/M
mw
] key.
5. Rotate the
DIAL
knob to select the channel num-
ber that the receive frequency was registered to on
step1.
6. While pressing and holding the
PTT
switch, press
and hold the [
V/M
mw
] key.
•
This will not cause transmission.
•
Confirmation screen “
OVWRT?
” is displayed.
7. Press and hold the [
V/M
mw
] key.
The split memory is stored.
•
While recalling the split memory, “-+” is displayed
on the LCD.
•
While operating the split memory, to reverse the
transmit and receive frequencies temporarily:
Press the [
F
menu
] key → select the [F-19 RPT.REV]
→ Press the
DIAL
knob.
When reversing the frequencies, “-+” will blink.
Split memory display
Reverse status display
