Yaesu FTM-6000E, Advance Manual

Page: 12 / 37

9
Activating the pager function
1. Press and hold the [ F menu ] key.
2. Rotate the DIAL knob to select [ 24 SQL.TYP ] then
press the DIAL knob.
3. Rotate the DIAL knob to select “ PAGER ”.
4. Press the
DIAL
knob to save the setting and return
to normal operation.
“
P
” is displayed at the 100MHz digit of the frequency
display.
• If the same code is specified for all individuals, all the individuals can be called at the same
time.
• The default code is “05 47”.
5. To disable the Enhanced Paging & Code Squelch, just repeat the above procedure,
rotating the DIAL knob to select “OFF” in step 3 above.
Notification of a Call from a Remote Station by the Bell Function
The Bell may be set to sound an Alert when a call from another station containing a
corresponding tone, DCS or pager code is received.
1. Press and hold the [
F menu ] key.
2. Rotate the DIAL knob to select [ 06 BELL ] then
press the DIAL knob.
3. Rotate the
DIAL
knob to select the desired number
of times (1/3/5/8 times or continuous) the Bell rings.
Default: OFF
4. Press the DIAL knob to save the setting and return to normal operation.
If the setting is “CONTI”, the bell keeps sounding until an operation is made.