87
Using the GPS Function
Positioning Using GPS
Displaying the
position information
Displaying the current position information of your station
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
[DISPLAY]
The menu list will be displayed.
$#%-
$#%-
6:4:
5'672/'07
4'5'6
%.10'
%10(+)
9 Ჰ 4'5
5%#0
&+52.#;
5+)0#.+0)
#245
126+1 0
5&%#4&
/'/14;
#
%#..5+)0
3
Touch
[2 TARGET LOCATION]
to select “NUMERIC”
Each time this is touched, the setting will switch
between “COMPASS” and “NUMERIC”.
Ż
6#4)'6.1%#6+10
&+52.#;5'.'%6
#0)'
4
1
$#%-)4170&%1.14
%1/2#55
9+&'
$#0&5%12'
Ჹ
Ჺ
$#%-
$#%-
4
Press for one second or longer
The display will return to the previous screen.
5
Press briefly
The latitude and longitude display screen will be
displayed.
6
Touch
[MY]
The latitude and longitude of your station will be
displayed in numerical figures.
Tip
When the Altitude display screen and Timer/Clock screen
are both “ON”, the screen will change in the following
sequence each time is pressed.
Normal frequency display → Compass/Lat&Lon display
screen → Altitude display screen → Timer/Clock screen
→ GPS screen
ᲽᲢ Ჿ Ჺ
0
Ჹ ᳁Ტ Ჽ ᲸᲺ
'
␃
␃
␃
␃
&+56#0%'
.#6.10
/ ;
; 4
. Ჺ
. Ჹ
Ჸ
Ჹ Ჽ Ჸ Ჸ
1
8(
1
8(
Ჸ
Ჸ Ჸ
MO
Displaying the position information of the partner station in the digital mode
In the C4FM digital V/D mode, the position and direction to the partner station can be
displayed in real time during the communication. The position information obtained from
the GPS is transmitted at the same time as the voice signal.
1
Switch the communication mode to AMS (auto mode select function) or digital mode,
or activate the GM function
Tip
Refer to “Using the GM function” ( P.99) on the basic method of using the GM function.
2
Switch to the latitude and longitude display screen
3
Touch
[YR]
The latitude and longitude of the partner station will be displayed in numerical
figures.
