19
Before Using
Name and Function of Each Component
●
Dual band screen
Band A and Band B will be displayed at the top and bottom.
Ჹ Ჽ Ჾ Ჸ Ჸ
᳀ Ჾ Ჸ
6 1 - ; 1 Ჺ
/ 76' 5%12'
/
8
5 3 .
8( 1
Ჽ Ჸ Ჸ
[V/M]
The VFO channel and memory channel will be
switched by touching this symbol.
The “V” is displayed in orange in the VFO
mode while the “M” is displayed in orange in
the memory mode.
[SQL]
The squelch level can be set after touching this
symbol. The characters are displayed in orange
for 5 seconds during the time that the squelch
level can be set.
[MUTE]
The receive audio can be muted by touching
this. The characters are displayed in orange
when the sound has been muted.
[SCOPE]
The band scope operation toggles on or
off each time this symbol is touched. The
characters are displayed in orange during the
band scope operation.
●
Band scope screen
The screen appears as shown, when the band scope is turned on.
5%12'
/ 76'
Ჽ
Ჿ
᳁
Ჹ
Ჹ
Ჹ Ჽ Ჾ Ჸ Ჸ
8( 1
/
8
5 3 .
Tip
The width of the band scope can be set to either “WIDE” or
“NARROW” under
[DISPLAY]
→
[4 BAND SCOPE]
in the
set-up menu.
●
Function menu screen
When is pressed, the function menu is displayed on the screen under the operating
band.
Ჹ Ჽ Ჾ Ჸ Ჸ
Ჹ Ჺ ᳀
; 1 - 1 * # / #
/ 76' 5%12'
/
8
5 3 .
Ჹ Ჽ Ჾ Ჸ Ჸ
8( 1
5-+25'.
1 ((
& 9
6Z29 4
* +
5 % # 0
4 ' 8
( 9 &
$ # % -
[BACK][FWD]
The menu changes each time these symbols
are touched.
Tip
The functions displayed in the menu can be assigned to the
touch keys at the bottom of the display. Refer to Page 121
for details.
