194
Customize Menu Settings and User Preferences
Using the Set-up Menu
5
Touch
[OUTPUT]
to select the output function of the
COM port
The setting changes as follows each time it is
touched.
“OFF(camera)” → “GPS OUT” → “PACKET” →
“WAYPOINT”
OFF (camera): The output function of the COM port
is not used (invalid operation).
GPS OUT: Outputs the GPS data obtained by the
radio.
PACKET: Outputs the AX.25 packet communication
data received using the in-built modem
function.
WAYPOINT: Outputs the position information of
other station beacons obtained from the
APRS packets received as WAYPOINT
data.
Tip
Factory default value: OFF (camera)
$#%-
$#%-
%1/21465'66+0)
1((ECOGTC
52''&
92(+.6'4
176276
᳁ᲾᲸᲸDRU
#..
92(14/#6
0/'#
Ჹ
#
6
Touch
[WP FORMAT]
to select the data format
This sets the number of digits in the call sign
information of the APRS beacon station appended
to each data when “WAYPOINT” is selected in Step
5 (the data will be output using the NMEA-0183
$GPWPL format).
The setting changes as follows each time it is
touched.
“NMEA 9” → “NMEA 8” → “NMEA 7” → “NMEA 6”
NMEA 9: The call sign will be limited to 9 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “JQ1YBG-14”).
NMEA 8: The call sign will be limited to 8 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “Q1YBG-14”).
NMEA 7: The call sign will be limited to 7 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “1YBG-14”).
NMEA 6: The call sign will be limited to 6 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “YBG-14”).
Tip
Factory default value: NMEA 9
$#%-
$#%-
%1/21465'66+0)
9#;21+06
52''&
92(+.6'4
176276
᳁ᲾᲸᲸDRU
#..
92(14/#6
0/'#
Ჹ
#
